1. Start after dust-producing work is complete
Schedule deep cleaning after drilling, sanding, installation, and major snagging. Contractors should remove rubble, packaging, and large offcuts so sharp objects are not hidden in dust.
Allow paint, grout, and sealant to cure according to instructions. Cleaning too early can mark fresh surfaces.
2. Work top to bottom and dry before wet
Begin with ceilings, lights, high surfaces, and walls, then move to windows, doors, radiators, and floors. Careful vacuuming with suitable filtration comes before washing.
- Ventilate and identify sensitive finishes.
- Vacuum from top to bottom, including edges and hardware.
- Clean glazing and frames with compatible products.
- Safely wipe furniture, sockets, and sanitary fittings.
- Wash floors and inspect them in side light.
3. Define the service scope
Floor area alone does not show the workload. Share photographs and identify window quantity, adhesive or paint residue, fitted furniture, and access to water, power, and a lift.
- Dust removal from walls, skirting, radiators, and sockets.
- Glass, frames, tracks, and sills.
- Kitchen and bathrooms, including cupboard interiors if requested.
- Equipment, products, transport, and removal of bagged waste.
4. Protect new finishes
Natural stone, wood, flooring, treated glass, and plated fittings can be damaged by acids, abrasives, or blades. Tell the team what was installed and test products in a discreet area.
Do not mix chemicals or energise equipment in wet areas. Ventilation and suitable protective equipment matter.
5. Inspect before the team leaves
Check corners, window tracks, door tops, grout lines, lights, and any cupboard interiors included in the quote. View floors in side light to find remaining dust film.
Record omissions immediately and agree on corrections. Allow drying and ventilation before moving textiles and belongings inside.
Frequently asked questions
How long does post-renovation cleaning take?
It depends on area, dust level, windows, and fitted furniture. Photos or a site visit provide a better estimate than floor area alone.
Does the cleaning team remove rubble?
Do not assume so. Heavy construction waste is often a separate service and should be stated in the quotation.
Can cleaning begin immediately after painting?
Follow curing times. Controlled vacuuming may be possible, but premature washing or contact can mark fresh work.